Avallon AWC242SZLH, Owner'S Manual

13

Operation

Installation Checklist before Operation

Using the Temperature Control Panel

The refrigerator has a temperature range of 40° F to 65° F. 

F

RUN

Power Button: 

Turns the unit on and off. Press and hold this button for approximately 3 seconds to 

adjust between power on and power off.

Light Button: 

Press this button to alternate between the three internal light colors: Blue, white, 

and amber. Press and hold this button for three (3) seconds to switch between Automatic light 

mode and Constant light mode. Please refer to the “Internal Light” section for further details.

Up Button: 

Press this button on the control panel to increase the temperature by 1 degree 

increments.

Down Button: 

Press this button on the control panel to lower the temperature by 1 degree 

increments.

Run Light:

 When lit, the unit is in cooling mode.

The 

Celsius (C) or Fahrenheit (F) indicator

 will be lit depending on which unit of temperature 

measurement is being used. To switch between C and F, press and hold both the Up and Down 

buttons simultaneously for approximately 3 seconds. A beep will sound and the indicator light will 

illuminate next to the desired temperature setting.

1. 

Have all packing materials and tape been removed from the interior and exterior of the refrigerator?

2. 

Have the installation instructions been followed, including connecting the machine to electricity? And has 

proper grounding been installed for the refrigerator?

3. 

Has the machine been leveled?

4. 

Is the refrigerator in a site where the ambient temperature is between 50° F and 90° F all year round?

5. 

Is there a clearance of at least 1- 2” at the rear, 1/4” at the top, and 1/4” at the sides for proper air 

circulation?

i
i