8
REMOVING THE SHELVES:
1.
Open the door completely.
2.
Remove all of the contents loaded on the shelf, if applicable.
3.
Line up the shelf notches with the rail posts as indicated below. This will require you to hold on to both
rails as you move the shelf to line up the posts with the notches on both sides of the shelf.
4.
Evenly lift the shelf up and then pull the shelf out.
Note: This model is manufactured with all rails pre-installed for maximum storage capacity. Our factory
default is to include a pre-installed display shelf designed to accommodate most 750 ml wine bottles.
Additionally, we include three extra storage shelves for those who opt for more storage capacity. If you
choose to utilize the included display shelf, most users will have no functional issues gliding the display
shelf back and forth with the factory installed rail above the display shelf still installed. However, some
larger Burgundy bottles may contact the overhead post. If this happens, we recommend you remove the
interfering rail and re-install just the Philips head screws in the cabinet so there are no holes left agape.
Tip: Safely store any removed hardware for possible future use.
