9
Operation
INSTALLATION CHECK-LIST BEFORE OPERATION:
1.
Have all packing materials and tape been removed from the interior and exterior of the wine
refrigerator?
2.
Have the installation instructions been followed, including connecting the machine to electricity?
3.
Has proper grounding been installed for the wine refrigerator?
4.
Has the machine been leveled?
5.
Is the wine refrigerator in a site where the ambient temperature is between 50° F and 90° F all year
round?
6.
Is there a clearance of at least 1- 2” at the rear, 1/4” at the top, and 1/4” at the sides for proper air
circulation?
USING YOUR CONTROL PANEL:
This wine cooler has a temperature range from 40° F to 65° F.
Power Button
Press and hold this button down for three seconds to power your unit on. Once this button is pressed,
the “Run” indicator light will illuminate to indicate the unit is on and running. Press and hold this button
for three seconds again and the unit will power off and the “Run” Indicator light will turn off.
Increasing the Temperature
To increase the temperature, press this button to raise the temperature by one (1) degree increments.
Decreasing the Temperature
To decrease the temperature, press this button to lower the temperature by one (1) degree increments.
Interior Light
Press this button to cycle through the different internal light settings. There are four light settings:
Constant Blue, Constant White, Automatic Blue, and Automatic White. Press this button to choose the
next option in the progression, eventually cycling back to the original setting. The lights will fade out of
the previous setting and into the next setting in the cycle each time you press this button. Press and hold
this button for three seconds to turn the lights completely off or to turn them back on. Open and close
the door to check the internal light color and whether the lights stay on with the door closed (Constant
Mode) or illuminate only when the door is open (Automatic Mode). Please refer to the “Internal Light”
section on the next page for further detail.