5
Installation Clearance Requirements:
When installing the wine refrigerator under a counter, follow the recommended spacing dimensions shown.
•
To ensure proper service access and ventilation, allow at least 1-2” of clearance at the back, 1/4” at the top, and 1/4”
at the sides. If the door side is against a wall, allow at least 2 3/8” of clearance. The installation should allow the unit
to be pulled forward for servicing, if necessary.
•
The installation should allow the unit to be pulled forward for servicing, if necessary.
•
A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with National Electrical Code
and local codes and ordinances, is required.
Important Notes:
• Choose a location that has
ambient temperatures above
50°F and below 95°F. Operation
outside these temperatures may
result in lowered efficiency or
cause other adverse effects.
• This unit MUST be installed in
an area protected from the
elements, e.g., wind, rain, water
spray or drips.
• The wine refrigerator should
not be located next to ovens,
grills or other high heat sources.
• Do not kink or pinch the power
supply cord between the wine
refrigerator and wall or cabinet.
