Avalon Bay Electric Pressure Cooker Product Guide
22
http://www.avalon-bay.com
If you wish to change the steam
time: press “+” or "-" buttons to
adjust. The steam time range is
6min-18min. Press the "Adjust
Texture" button can adjust three
kinds of texture in “Low-Med-
High”. It will begin heating
without making any operation in 8
seconds with the indicator
blinking 8 times. The control panel
will begin counting down the
selected cooking time in one
minute increments.
Once the cook time has elapsed,
the pressure cooker will beep and
will automatically switch to the
keep – Warm function, indicated
by bb:00. Please move the
pressure valve to the Exhaust
position and allow the 7-in-1
Electric Pressure Cooker to cool
down.
Open the lid by turning it counter
clockwise to unlock. Check food
for doneness. If cooking is
complete, remove food for
serving. Press the ON/OFF button
to turn the multicooker off.
Unplug from the power outlet
when not in use.
Note
Before steaming check that the pressure valve is set to the “Close” position. It may take several minutes
for water to reach a boil. Do not attempt to open the lid while steaming. If the lid does not open when
the pressure cooker switches to “Keep-Warm,” allow it to cool so that any built up pressure may
dissipate.
Helpful Hints
For smaller amounts foods, or to increase steaming space, a heat-safe dish may be placed on top of the
steam rack. The dish should be small enough that space remains between the edges of the dish and the
inner cooking pot to allow steam to reach the food.
For best taste, it is recommended to serve food immediately, however if the rest of the meal is not yet
ready, food may be left on “Keep-Warm."