12.
On/Off Power button
13.
ST4 autoguide port
14.
12-18 VDC power supply plug
15.
WiFi
capability symbol
16.
DSLR Canon exposure
management port
17.
USB2 I/O Port
18.
Handheld keypad RJ45 plug
19.
Stepper Motor Auxiliary Output Port
(Aux 1)
20.
Stepper Motor Auxiliary Output Port
(Aux 2)
21.
On/Off LED
Figure 1.1.c Illustrates the manual keypad which is connected to the StarGo Control Box at
the plug labeled “Keypad” (#7) with the included RJ45 cable.
Figure 1.1.c Keypad
W / E
Decreases/Increases the Right Ascension
N / S
Increases/Decreases the Declination
Fn
Function Key
SPEED+/-
Increases/Decreases the mount’s
movement speed
Fn&SPEED+/-
Increases/Decreases the Polarscope
LED light intensity
FOCUS+/ -
Controls the in and out movement of the
SteelDrive focuser motor in the port with the same name.
Also controls the movement of any focuser connected to
either of the two Aux ports.
Fn&FOCUS+/-
Changes the Aux port to which the
changes are sent. (1)
Fn&N / S
Select system tracking speed (Sidereal,
Solar, Lunar, Terrestrial) (2)
Fn&E / W
Select telescope max slewing speed (Low,
Medium, Fast, Ultra) (3)
(1)
By holding pressure on the Fn key and then pressing the FOCUS+ key, each time the FOCUS
key is pressed, the output port to changes the order: Steeldrive (in the Bluetooth version only),
____________________________________________________________________
©
All Rights reserved
11
Figure 1.1.b.StarGO Wi-Fi Front
Panel
