b
, show the main panel appearance when the DSLR and Steeldrive buttons
c, shows the main panel when are unchecked.
The Check for AUX Advanced Function push button allows, when pressed, to access the
controls of AUX1 and AUX 2 device motor parameters for fine tuning:
NOTE:
The motors driven by the AUX 1 and AUX 2 ports are disconnected from the power
once they reach the required position. It means that in this state they do not absorb any
current but are not able to keep mechanical loads requiring an active effort.
NOTE:
In all three frames of this panel it is possible to define the number of decimal digits
that will be shown in the main panel or in the separate windows (see section 3.4).
Furthermore, it is possible to change the Aux port denomination by double clicking over the
frame tab.
3.2.4 ADVANCED Panel
Clicking on the “ADVANCED” tab brings up a panel in which base parameters are selected
during the installation phase and rarely used thereafter. (
____________________________________________________________________
©
All Rights reserved
31
Figure 3.2.4a: “ADVANCED”
