2.
Press the Settings icon on the bottom bar. A screen will appear with a long list of
all the parameters to be set. First, open the “
Time and Date Setting
” arriving at
the screen shown below. If the device date and time shown on the screen are
correct, check the “
Use current Time
”
box. Otherwise set the current date and
time as required. When done click over the X in the upper right corner to save
and exit the current page.
Figure 4.3f: SkySafari time and date settings
3.
Open the “
Location Settings
” page. Insert the site name and the geographic
coordinates, insert also the approximate elevation and the Standard Time Zone.
It is very important that the date, time and location settings are exactly the
same as those saved in the StarGO settings to avoid any conflict.
When
finished, press “
Save User-defined Location
” for future use.
Figure 4.3g: SkySafari location settings
____________________________________________________________________
©
All Rights reserved
60
