4.
The last but very important set of parameters is the “
Scope Setup Settings
”. The
instructions in this page
show how
to insert the telescope and mount type
(Meade LX-200 Classic and Equatorial GOTO or Alt-Az as needed, respectively).
Figure 4.3h: SkySafari communication settings panel
In case of a Macintosh and iOS device connection via Wi-Fi, an IP Address of
10.0.0.1 and a Port Number 4030 should be entered as shown in the following
screenshot:
____________________________________________________________________
©
All Rights reserved
61
Figure 4.3i: SkySafari communicaton settings
panel
