Avalon 21 TRV Installation Instructions Download

Page: 1 / 4

Avalon Hideaway Bungalow Face

(95700121)

Page 1 of 4

Printed April 16, 2008

COMPATIBILITY

• Avalon Hideaway Fireplace

PACKING LIST

• Face (includes Backing Plate and Doors)

• (2) Handles

• (4) 8-32 x 1/2" Screws

• Push-On Face Brackets (for 21 TRV Only)

INSTALLATION INSTRUCTIONS

N O T E :

If installing with thick facing or retrofitting tile, follow the directions for “Push-On” face brackets on page 3.

Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.

Remove the doors from the backing plate. Install the backing plate as shown in the illustration below.

Tilt the backing plate back and

insert the bottom brackets into

the lower slots until they lock in

place.

Lift and rotate the backing plate

forward until the top brackets lock

into the upper slots.

21-1/8”

35-3/8”

Backing Plate

Access Door

(for accessing controls)

Summary of Contents for 21 TRV

Page 1: ...follow the directions for Push On face brackets on page 3 Turn off gas to the appliance and make sure it has fully cooled prior to conducting service 1 Remove the doors from the backing plate Install...

Page 2: ...cking plate Attach the handles and verify magnet position if applicable Hold each door at a 90 angle to the backing plate and hang in place a b Attach the handles to the doors with the included screws...

Page 3: ...Retrofit Installations If a 21 TRV is already installed into a standard drywall installation with the standard brackets it is extremely difficult to install tile behind face this requires the firepla...

Page 4: ...AAAAAA AAAAAA Loosen these two nuts above the firebox 3 8 wrench Slide the heat shield forward until it is flush with the facing and tighten the nuts to secure Face Installation and Removal AA AA Once...