Avalon Hideaway Bungalow Face
(95700121)
Page 3 of 4
Printed April 16, 2008
PUSH-ON FACE BRACKETS
N O T E :
The push-on brackets are only compatible with the 21 TRV (2008 or later).
Overview
The optional push-on brackets allow the face to be installed up to 1” from the front of the fireplace. In addition, the
new brackets allow the face to be installed straight-on to the fireplace. This permits the use of thick facing material
directly above the face (no gap is required to slide the face into place).
Tile Retrofit Installations
If a 21 TRV is already installed into a standard drywall installation with the standard brackets, it is extremely difficult to
install tile behind face (this requires the fireplace location to be moved forward). With the new push-on brackets, the
face may be located up to 1” from the front of the fireplace, allowing tile or other non-combustible to be placed behind
the face.
Bracket Installation
Remove the stock brackets and install the push-on brackets to the back of the face following the directions below.
Note how the lower
brackets angle inwards.
The upper brackets are installed with the notch
facing to the left (this insures the brackets are
installed right side up)..