4
Clock Setting Operations
● When the power adapter jack connects the unit, the unit is on, display will show the original
time:12:00am, January 01, 2015, Thursday;
● When setting the clock, press and hold
SET
button(about 3 seconds) to enable time setting
mode. The setting of parameters is the following sequence:
hours=>minutes=>year=>month=>date.
1.The selected parameter will blink meaning readiness for adjustment.
2.Press
UP
button to adjust the parameter up. Press
DOWN
button to adjust the parameter down.
When you have selected the right parameter, press a quick
SET
button for confirmation.
1) When pressing a long
SET
button, the hour digits will blink, press
UP/DOWN
to adjust, the
range is (1-12), press a quick
SET
button for confirmation.
2) Minute digits will be blinking, press
UP/DOWN
to adjust, the range is (00-59), press a quick
SET
button for confirmation.
3) The year digits will be blinking, press
UP/DOWN
to adjust, the range is (00-99), press a quick
SET
button for confirmation.
4) The month digits will be blinking, press
UP/DOWN
to adjust, the range is (01-12), press a quick
SET
button for confirmation.
5) The date digits will be blinking, press
UP/DOWN
to adjust, the range is (01-31), press a quick
SET
button for confirmation.
● Day of week will be set automatically.
● In time setting mode, if no button is pressed within 10 seconds after a parameter is selected, the
unit will automatically go to original clock time.
● To turn off the display, press and hold
UP
button(about 3 seconds). To turn back on the display,
press and hold
UP
button(about 3 seconds).
Remarks:
● In clock setting, the format is 12 hours, please choose AM/PM to adjust the clock.
● In order to back-up the clock, please use a cell battery to support the clock memory.
● Press and hold
DOWN
button(about 3 seconds), the entire display will be lit.
