56
Optional
Equipment
(for qualified installers only)
© Travis Industries
4101110
100-01256_000
20 Attach the receiver to the control panel with the two #8 machine screws (Figure 31).
Figure 31
21 Re-attach the bottom plate to stove, taking care to prevent any wiring from being pinched (see Figure
32). Use the included wire ties, if necessary, to keep all wiring from contacting any hot or moving
components. Attach the back panel.
Figure 32
22 Place batteries into the receiver and transmitter (see Figure 33). Calibrate the receiver to the
transmitter (see Figure 34 - use a paperclip to press the “PRG” button, let it beep, then press any
button on the transmitter – the receiver should beep 5 times – see the operating instructions for
further details).
Figure 33
Figure 34
