manualshive.com logo in svg

Avalon Olympic 1190, Owner'S Manual

The Avalon Olympic 1190 is a top-of-the-line sports watch, offering unrivaled functionality and style. Ensure you can fully enjoy its features by downloading the comprehensive Owner's Manual for free at 88.208.23.73:8080. This manual is your go-to resource, providing step-by-step instructions and valuable insights to maximize your Avalon experience.

Share
Download
background image

46

Index

© Travis Industries

93508061

4050526

Air Control ...................................................28
Air Tube Part Number ....................................36
Air Tube Removal & Replacement ....................37
Alcove.........................................................12
Ash Disposal ................................................32
Baffle Parts ..................................................36
Baffle Removal and Replacement .....................37
Blower Cleaning............................................34
Blower Does Not Run (Troubleshooting) ............31
Blower Installation (rear) .................................42
Blower Operation (optional) .............................29
Burn Rate ....................................................28
Cathedral Ceiling...........................................14
Ceiling Penetration ........................................10
Chimney Cleaning .........................................33
Chimney Inspection (Creosote) ........................33
Chimney Requirements ..................................10
Chimney Termination Requirements..................11
Cleaning the Ash...........................................32
Cleaning the Glass ........................................32
Clearances (stove) ........................................8
Close Clearance Connectors ...........................8
Connector Requirements ................................10
Creosote Check ............................................33
Daily Maintenance .........................................32
Dimensions ..................................................6
Door and Glass Inspection ..............................33
Door Assembly .............................................35
Door Gasket Replacement ..............................35
Door Handle Replacement ..............................35
Door Opening ...............................................25
Door Parts ...................................................35
Draft Performance .........................................10
Elbows (Chimney) .........................................10
Emissions ....................................................6
EPA Approval ...............................................6
Exterior Chimney...........................................11
Features......................................................6
Fire Starting .................................................26
Firebox Assembly..........................................36
Firebox Parts................................................36
Firebrick and Baffle Inspection .........................34
Firebrick Removal & Replacement ....................36
Floor Protection Requirements (stove) ...............8
Glass Cleaning .............................................32
Glass Replacement .......................................35
Hearth (Floor Protection - Stove) ......................8
Hearth Stove ................................................16
Heating Specifications ....................................6
Hints for Burns..............................................30
Installation Options ........................................6
Installation (stove) .........................................7
Leg Installation .............................................40
Listing Label.................................................39
Maintenance ................................................32
Mobile Home Requirements ............................13

Monthly Maintenance .....................................33
Noise (Normal Operating Sounds) ....................29
Non-Combustible Alcove.................................12
Opening the Door ..........................................25
Operation ....................................................17
Outside Air Boot Installation.............................43
Outside Air...................................................11
Over-Firing the Stove .....................................25
Overnight Burn .............................................29
Paint (Touch-Up Paint) ...................................34
Paint Curing .................................................25
Rear Blower Installation ..................................42
Re-Loading the Stove.....................................29
Safety Label .................................................39
Safety Precautions ........................................4
Smell (from paint curing) .................................25
Smoke Enters Room (Troubleshooting)..............31
Sounds (Normal Operating Sounds) ..................29
Starting a Fire...............................................26
Stove Does Not Burn Long Enough...................31
Stove is Not Hot Enough (Troubleshooting) ........31
Table of Contents ..........................................3
Touch-Up Paint.............................................34
Troubleshooting (Operation) ............................31
Warranty Card ..............................................2
Warranty .....................................................37
Wood..........................................................30
Yearly Maintenance .......................................34

Summary of Contents for Olympic 1190















































Reviews:

No comments

Related manuals for Olympic 1190

Paloform MISO CIR-18 Installation Manual preview
MISO CIR-18
Brand: Paloform Pages: 16
Sylvania SOM979PS-36AFCN Instruction Manual preview
SOM979PS-36AFCN
Brand: Sylvania Pages: 4
Valor Fires 341 black beauty slimline Installation And Owner'S Manual preview
341 black beauty slimline
Brand: Valor Fires Pages: 40
Vexar DVF32TMHPN-A Owner'S Operation And Installation Manual preview
DVF32TMHPN-A
Brand: Vexar Pages: 36
Living 085-1296-8 Assembly Instructions Manual preview
085-1296-8
Brand: Living Pages: 14
CSA BG-36B Manual preview
BG-36B
Brand: CSA Pages: 22
MHG Heating GZ 2 Installation, Operation & Maintenance Instructions Manual preview
GZ 2
Brand: MHG Heating Pages: 28
evolution fires VEGAS PETITE Owner'S Manual preview
VEGAS PETITE
Brand: evolution fires Pages: 6
Euroheat Nestor Martin 023 Operating Instructions Manual preview
Nestor Martin 023
Brand: Euroheat Pages: 32
Napoleon EPI3TN Installation And Operating Instructions Manual preview
EPI3TN
Brand: Napoleon Pages: 80
Faber Relaxed M Smart Installation Manual preview
Relaxed M Smart
Brand: Faber Pages: 30
Monessen Hearth ILDV20NV User Manual preview
ILDV20NV
Brand: Monessen Hearth Pages: 40
Sunnydaze Decor NB-MS201 Assembly And Instruction Sheet preview
NB-MS201
Brand: Sunnydaze Decor Pages: 2
Monzana 103241 Instructions Manual preview
103241
Brand: Monzana Pages: 16
Monzana 103239 Manual preview
103239
Brand: Monzana Pages: 37
MR. BAR-B-Q Fire Island GAD15410M Owner'S Manual preview
Fire Island GAD15410M
Brand: MR. BAR-B-Q Pages: 22
BLUE SKY PFP1513-CF Owner'S Manual preview
PFP1513-CF
Brand: BLUE SKY Pages: 16
Heat & Glo SL-350TRSI-AUE Installation And Operation Instructions Manual preview
SL-350TRSI-AUE
Brand: Heat & Glo Pages: 41

Brands by name

Popular brands

Load more brands