Safety First
Avant 850
12
Handling of heavy loads
WARNING
Handle heavy loads and
attachments with care - Risk of
tipping over.
Follow all instructions and
warning labels to avoid tipping
over of the loader.
Always lower the load or
attachment down on the
ground before you leave the
driver’s seat.
Keep loads as low and as
close to the loader as possible.
When loading, always keep
the loader frame as straight as
possible.
Never take a heavy load on
the loader from high level –
e.g. from truck, shelf etc.
Keep the articulated frame of
the loader in straight position
when you lift heavy loads. If
you turn the loader during load
handling, the stability of the
loader will decrease, and it
may overturn the machine.
The use of extra rear weights
or ballasted tires is
recommended. See pages 58
and 36 for different options.
Make sure to follow the
recommended tyre pressures
and pay attention to the
condition of tyres.
When you estimate the lifting
capacity of the loader,
remember to take the weight of
the attachment into account.
Whenever you handle heavy loads or heavy
attachments:
Always handle heavy loads only on firm, level
ground while you drive slowly with the loader.
Uneven or inclined terrain significantly
reduces the Rated operating capacity (see
also page 41).
Use the maximum loads indicated in the load
chart on the loader and in this manual as a
guideline.
All rated operating capacities are based on
the criteria that the loader is level on firm
ground. When the loader is operated in
conditions that deviate from these criteria
(e.g. on soft or uneven ground, on a slope, or
when subject to slide loads), you must take
these conditions into account.
Remember that the actual load carrying
capacity varies greatly according to operating
conditions and control manner. Be especially
careful when the load sensor indicator is
activated.
Keep in mind that a heavy load or long distance
between the loader and the centre of gravity of
the load will affect the balance and handling of
the loader.
Summary of Contents for Avant 850
Page 1: ...English Operator s Manual 2020 A441827EN 2020 1 2020 www avanttecno com...
Page 128: ...Avant 850 128...
Page 132: ...Avant 850 132 Notes...
Page 133: ...Avant 850 133 Notes...
