Avant 850
Safety First
13
.
WARNING
Risk of overturning - Articulated
frame.
Turning articulated frame
can lead to overturning of the
loader on inclined terrain or when
driving at high speed. Never turn
frame towards the slope while
operating on inclined ground.
Always drive slowly when carrying
load or when turning with the
loader.
.
..
WARNING
Risk of overturning - Sudden
movements can tip the machine
over.
Movements, such as
stopping, turning, or lowering the
boom abruptly, can cause loss of
stability. Always drive slowly and
operate the controls of the loader
very carefully, especially when
handling heavy loads.
.
Load sensor system:
The loader is equipped with a load sensor system. It
gives an audible warning signal and at the same time
an indicator lamp lights up in the dashboard when
there is a risk that the loader tips over its front axle.
When the system gives a warning signal, the load
that is being lifted may be too heavy in relation with
the lift capacity of the loader.
WARNING
If the warning is triggered by the
load sensor:
Lower the load slowly on the
ground.
Retract the telescopic boom.
Never extend the telescopic
boom any further when the
warning is triggered.
Avoid abrupt movements.
Sudden movements of the
boom, or abrupt starting or
stopping of travel movement,
or turning of the loader, can
decrease the stability of the
loader, causing tipping over.
Reduce load, or add enough
counterweights to the loader to
complete the task.
Keep in mind that the load
sensor warns only about the
possibility of tipping forward on
level ground.
Summary of Contents for Avant 850
Page 1: ...English Operator s Manual 2020 A441827EN 2020 1 2020 www avanttecno com...
Page 128: ...Avant 850 128...
Page 132: ...Avant 850 132 Notes...
Page 133: ...Avant 850 133 Notes...
