Avant 850
Controls and options of the Loader
69
.
Cab Safety
Make sure visibility from the cab is adequate. Keep
all window panels clean and clear of snow, ice, etc.
Familiarise yourself with the special drive features
and space needs of this articulated loader, equipped
with cab, on a flat, even and open place.
Remember that, when turning, the cab extends
beyond the turning radius of the wheels. This should
be taken into consideration especially when driving in
confined spaces, in order that the rear of the cab will
not get damaged.
In case the normal
opening on the left side
of the loader is blocked,
the windscreen can be
used as an emergency
exit.
If necessary, the
windscreen can be
broken with the
emergency hammer
located in the cab.
Always make sure that the following equipment are
functional and present in the cab:
Emergency window hammer
Removable safety pin on the right side window
Windscreen wiper and washer
Functional heater and its blower for de-misting
the windscreen
Side mirrors
Cab air filter must be in place
CAUTION
Risk of breaking glass - Do
not drive with an open cabin
door.
The door may break
upon contact with wheels.
Also, turn the articulated frame
to straight position before
opening the door.
Windscreen washer and wiper
The windscreen washer is operated with multi-
function control switch fitted to the right side of
steering column.
The switch has the following controls:
1.
Spray washer fluid
2.
Intermittent operation
3.
continuous operation, slow
4.
Continuous operation, fast
Windscreen washer tank and filler cap are located in
the front storage compartment.
If ambient temperatures may drop below freezing
point, add freeze resistant washer fluid beforehand
and use the washer until it runs though the spray
nozzle. Freezing water can damage the pump, tank,
hoses and their connectors, and the nozzle.
.
Ventilation and heating
The cab GT is equipped with heater as standard. In
addition, it can be equipped also with air
conditioning.
The controls for ventilation, heating, and air
conditioning are located on the left side of the
driver's seat:
1.
Fan speed switch, 4 speed settings
2.
Air flow temperature can be adjusted with the
rotary knob
3.
Air conditioning, ON/OFF
4.
Air recirculation system
Summary of Contents for Avant 850
Page 1: ...English Operator s Manual 2020 A441827EN 2020 1 2020 www avanttecno com...
Page 128: ...Avant 850 128...
Page 132: ...Avant 850 132 Notes...
Page 133: ...Avant 850 133 Notes...
