Avant 850
Working with attachments
91
Rotating adapter A424406
The rotating adapter is intended for same kind of work as the tilting adapter.
The fully rotating adapter makes it possible to turn the attachment fully upside
down. This can be helpful in levelling work.
WARNING
Risk of tipping over - A side shift adapter decreases the sideways stability of the
loader significantly.
Use all adapters only for specific tasks, as instructed in the
operator’s manuals of each attachment. Remove all adapters for general use of the
loader. Adapters decrease stability of the loader and must be used only on level ground.
CAUTION
Adapter plates reduce lifting capacity - Do not use adapters with heavy loads or
attachments.
The adapter plates move the centre of gravity of the attachment further
away from the loader. This increases the risk of tipping over and can limit the use of
heavy attachments.
All coupling adapters are intended only for specific attachments that can be safely and
efficiently used with an adapter. The adapters are not intended for general use. Any
adapter should be removed from the loader when no longer using an attachment
requiring it.
Avoid the use of bracket adapters that are intended for mounting of 200 series 1
attachments on other loaders. The 200 series 1 attachments are not designed to be used
with other loader models than the 200 series.
Summary of Contents for Avant 850
Page 1: ...English Operator s Manual 2020 A441827EN 2020 1 2020 www avanttecno com...
Page 128: ...Avant 850 128...
Page 132: ...Avant 850 132 Notes...
Page 133: ...Avant 850 133 Notes...
