Storage, Transport, Tie down points and Lifting
Avant 850
96
WARNING
Risk of dropping of the loader -
Use appropriate equipment and
follow safety instructions and
safe practices when lifting the
loader.
Remove heavy attachment and
possible extra weights from the
loader.
Lower the boom down.
Mount the frame articulation
lock to the frame of the loader.
Follow the instructions given in
the operator’s manual of the
lifting kits for each cab type.
Never lift a loader with persons
riding the machine.
Lift the loader as smoothly as
possible, and do not allow it to
drop or wobble.
.
The following picture shows the principle of lifting a
loader with the ROPS frame using four lifting straps:
WARNING
Risk of dropping of loader -
Never attempt to lift the loader
from the counterweights or use
them as tie-down points.
Eyelets
on extra side counterweights are
for installing or removing the
sideweight only. Remove eyelets
from counterweights to prevent
their use.
Towing (retrieval of the machine)
The loader cannot be towed. It is equipped with a
hydrostatic transmission and a hydraulic parking
brake, which can be released only when the engine
is running and there is enough pressure in the
hydraulic system. In case there is a technical failure
and the engine cannot be started or doesn’t start, the
loader must be pulled aside with another machine or
lifted e.g. with a forklift truck and transported to
service.
Summary of Contents for Avant 850
Page 1: ...English Operator s Manual 2020 A441827EN 2020 1 2020 www avanttecno com...
Page 128: ...Avant 850 128...
Page 132: ...Avant 850 132 Notes...
Page 133: ...Avant 850 133 Notes...
