manualshive.com logo in svg

AVANT 700 2012 Series, Operator'S Manual

The AVANT 700 2012 Series Operator's Manual is a comprehensive guide that empowers users with in-depth knowledge on operating and maintaining their AVANT 700 machine. This manual is available for free download at 88.208.23.73:8080, ensuring easy access to essential instructions and valuable insights for optimal product performance.

Share
Download
background image

Table of contents

700 Series

2

TABLE OF CONTENTS

Table of contents...............................................2
Introduction, warranty.....................................3
Safety instructions ........................................... 4
Description of the loader..................................7

Main parts of the loader..................................8

Signs and decals...............................................9

Technical specification...................................10

Load diagram ................................................11

Transporting instructions and tie down points .12

Operating instructions....................................13

Controls........................................................14

Control of loader boom, auxiliary

hydraulics and other functions ......................15

Attachment control switch pack...................15

Dashboard ....................................................16

Controls in the footwell................................16

Suspension seat.............................................17

Telescopic boom...........................................17

Battery disconnect switch.............................17

Boom self levelling ........................................17

Boom floating................................................17

Joystick..........................................................17

Engine block heater ......................................18

Trailer coupling .............................................18

Extra counterweights....................................18

Headlight, beacon, blinker & reflector kit.....18

Drive circuit release switch ..........................18

Anti slip valve ................................................18

Battery disconnect switch.............................18

Tilt adapter ...................................................19

Extra auxiliary hydraulics outlets,

front and rear................................................19

Work light kit ................................................19

Snow chains ..................................................19

Starting the engine ........................................20

Stopping the engine ......................................20

Drive control ................................................21

Steering of the machine ................................22

Loader control ..............................................22

Using the auxiliary hydraulics........................22

Cabs..............................................................23

Requirements for attachments......................24

Coupling the attachments.............................24

Hydraulic attachment coupling plate ............24

Coupling  the hydraulic hoses of the attachment ......25

Service and maintenance instructions ...........26

Safety instructions for maintenance..............26

Releasing the pressure of hydraulic system...26

Installing of service support and frame lock..27

Daily inspections ...........................................27

Maintenance schedule...................................27

Cleaning of the machine ...............................28

Greasing of the machine ...............................28

Battery check................................................28

Hydraulic oil level..........................................28

Hydraulic oil filter change .............................28

Hydraulic oil change......................................28

Check and tightening of bolts, nuts etc.........28

Check of hydraulic pressure .........................28

Adjustment of hydraulic pressure .................29

Adjust and change of slide pads on telescopic boom29

Function and calibration of load sensor ........30

Service, engine ..............................................30

Storage of the machine .................................30

Fuse box........................................................30

Jump start and auxiliary power .....................30

Safety instructions when handling the battery..30

Greasing points .............................................31

Refueling........................................................31

Metal structures of the loader ......................31

Light bulbs.....................................................31

Filters ............................................................32

Troubleshooting ............................................33

Service history ..............................................34

EC Declaration of Conformity........................35

Original instructions

https://tractormanualz.com

Summary of Contents for 700 2012 Series





































Reviews:

No comments

Related manuals for 700 2012 Series

Brands by name

Popular brands

Load more brands