background image

 

 

17 (28) 

 

 

6.1

 

Checks before use 

  Remove all obstacles from the operating area, such as large tree branches or rocks, before starting 

the operation. Remember correct working methods and avoid leaving the driver’s seat unnecessarily. 

Remove or mark also all hidden obstacles that could cause damages or risks of injuries, and make 

sure that there are no electric cables, water or gas pipes at the reach depth of the equipment. 

  Use only when all pins are locked and secured in place. 

  Before each use, check the general condition of the Rotary hoe and the loader. Ensure that the blades 

are intact and can rotate freely, and that there is no string or other foreign material coiled around the 

shaft of the Rotary hoe. 

  Check that there is no broken components in the Rotary hoe. 

  Check regularly to ensure there are no hydraulic leaks. Refer to chapter 7 for maintenance 

instructions. 

  Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to 

enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to 

reverse with the loader. Never assume that bystanders will remain where you last saw them; 

especially children are often attracted to the moving equipment. 

  Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure 

that the loader and the attachment are used in a safe manner and as intended. Do not allow children 

to operate the equipment. 

  Never operate the loader or attachments while under the influence of alcohol, drugs, medication that 

may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment.  

  Remember correct working methods and avoid leaving the driver's seat unnecessarily. Practise the 

use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the 

particular loader model, it is recommended to practise its use without any attachments. 

 

 

6.2

 

Operator qualification 

Anyone who intends to use this attachment must: 

  Know the intended use of this attachment. 

  Know how to use the loader safely in different operating conditions. 

  Read and always follow the instructions concerning the use of the attachment in this operator's 

manual. 

  Have this manual and the operator's manual of the loader available. 

  Ensure that the loader and the attachment are used in a safe manner and as intended. 

  Never allow children to operate the equipment. 

  Never operate the loader or attachments while under the influence of alcohol, drugs, medication that 

may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment. 

  Complete any possible mandatory training required by the employer before use. 

 

 . 

 

Summary of Contents for A37430





























Reviews: