Avant e6
10
17.
Follow all inspection, service and maintenance
instructions. If you notice any faults or
damages on the machine, these must be
repaired before starting operation.
18.
Before any maintenance or repair operation
always stop and switch off the loader, lower
the boom down and release pressure from
hydraulic system. Read safety instructions for
maintenance on page 83.
19.
Do not let any person operate this loader who
has not read safety instructions and is not
familiar with the safe and correct use of this
loader.
20.
Never operate the loader or attachments while
under the influence of alcohol, drugs,
medication that may impair judgment or cause
drowsiness, or if not otherwise medically fit to
operate the equipment.
.
..
DANGER
Falling of load or unexpected
lowering of loader boom - Risk
of crushing.
Always remember
that the boom may lower
unexpectedly due to loss of
stability, mechanical fault, or if
another person operates the
controls of the loader, leading to
crushing hazard. The attachment
or the loader are not intended to be
left to keep a load elevated for
longer periods. Lower the
attachment before leaving the
driver's seat. The stability of the
loader may change when leaving
the driver’s seat, leading to tipping
over of the machine.
.
..
WARNING
Risk of overturning - Sudden
movements can tip the machine
over.
Movements, such as
stopping, turning, or lowering the
boom abruptly, can cause loss of
stability. Always drive slowly and
operate the controls of the loader
very carefully, especially when
handling heavy loads.
.
WARNING
Risk of overturning - Articulated
frame.
Turning articulated frame
can lead to overturning of the
loader on inclined terrain or when
driving at high speed. Never turn
frame towards the slope while
operating on inclined ground.
Always drive slowly when carrying
load or when turning with the
machine.
.
WARNING
Risk of falling objects.
Never tilt
the attachment back when it is
lifted high. Operate only with
machines equipped with ROPS
and FOPS structures.
.
