27
Service and maintenance instructions
R35
Daily inspections
l
Maintenance operation
n
When necessary
*) A 250 bar pressure gauge, equipped with manometer fitting, is required for
checking the pressure of the boom lifting and auxiliary hydraulics.
Loader
1. Check tyre pressure
2. Clean the machine
3. Grease the machine
4. Check battery electrolyte level
5. Check hydraulic oil level
6. Change hydraulic oil filters
7. Change hydraulic oil
8. Check tightness of bolts, nuts
and hydraulic fittings
9. Check pressure of hydraulic system *)
10. Adjust pressure of hydraulic system *)
11. Check slide pads 1 and 2 on the boom
12. Adjust or change slide pads 1 and 2
13. Check/change slide pads 3, 4, 5, 6, 7 and 8
Engine*)
14. Check engine oil level
15. Change engine oil
16. Check condition and tightness of alternator belt
17. Check water hoses and hose clamps
18. Change engine oil filter
19. Change fuel filter
20. Clean radiator cells
21. Change coolant
22. Change air cleaner element
23. Check and adjust valve clearances
24. Check opening pressure of nozzles
Every week
Every
800h
Every
200 h/year
After 50h
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
n
n
n
n
n
n
n
l
l
l
l
l
l
n
l
Maintenance schedule
Following table shows the maintenance and service points and intervals. There are more detailed instructions
about each service operation, in numerical order, on the following pages.
Tyre pressure
Boom movements
Drive control and steering
Eventual need for lubrication
Cleanliness of engine compartment and radiators
Eventual oil leakages
Locking of attachment and locking pins on
attachment coupling plate, function of attachment,
position of attachment hoses
Condition of the loader, safety frame, seat belt
and other safety equipment