Troubleshooting
33
R35
TROUBLESHOOTING
Problem
Hydraulic attachment does not
work when the auxiliary
hydraulics control lever is moved
Engine does not start.
The machine moves after
parking brake has been engaged.
Cause
The hoses of the attachment or
the machine multi connector are
mounted on wrong fittings.
No fuel.
Auxiliary hydraulics control lever
is in locking position.
Blown fuse no. 3 (fuses in the
fuse box are numbered).
Battery empty or damaged, or
battery disconnect switch is
switched off.
If the starter motor works but
there comes no smoke from the
exhaust when one tries to start,
the engine is not getting fuel.
The pins of the parking brake
mechanism have not locked
properly in the wheels.
Remedy
Check and correct, contact
Avant service if necessary.
Fill the tank and start the
engine. Diesel engines have
automatic fuel bleeding just
glow and restart.
Turn the lever in center
(neutral) position.
Change the fuse.
Turn battery disconnect switch
to ON, check charge of the
battery.
Make sure that the fuel hoses
and fuel filter are clean and not
frozen. Clean if necessary.
Drive slowly forward or
backward in order to lock the
parking brake.When releasing
the parking brake do this in
opposite order.