Safety instructions
5
Handling of heavy loads
Never take a heavy load on the loader from
high level e.g. from truck, shelf etc. risk
of tipping over!
Always put the load down on the ground before
leaving the machine. When loading, always
keep the loader chassis as straight as possible.
Personal safety and protective equipment
Wear safe clothing and personal protective equipment
(PPE). Protect yourself against work hazards like noise,
ejecting debris or dust for example.
Noise level at drivers seat can exceed
85 dB(A). Wear hearing protection
when working with the loader.
It is recommended to wear safety
footwear when working with the loader.
Wear protective gloves when handling
hydraulic hoses.
Follow regulations regarding
protective equipment. Wear eye
protection and hard hat or other
protective equipment as needed.
Read Operators Manual of the attachment for more information
about protective equipment needed in the work.
Safety frame (ROPS) and safety canopy (FOPS)
Safety frame (ROPS) protects the operator in
case the machine tips over. Always fasten the
seat belt in order to stay inside the safety frame
protective area. Never take off the safety frame.
When working in conditions where falling objects may
be a risk (on building sites etc.), the loader must be
equipped with a falling objects protective canopy
(FOPS), part no. A48906.
Electric system
Lead acid batteries can produce flammable and
explosive gases. Make sure that the ventilation is
sufficient and keep arcs, sparks, flames and lighted
tobacco away from battery.
Battery acid causes severe burns. In case of acid
contact, wash immediately with water for several
minutes and get medical attention in case of eye
contact.
Read the instructions for jump start on page 30.
Never charge a frozen battery.
R35