User Manual
4 www.AvantcoEquipment.com
Troubleshooting
Error Message
Cause
Solution
E01
The cooker has become too hot
(e.g. due to blocked ventilation slots).
Clear vents, let cooker cool down before restarting.
If error message continues contact retailer.
E02
Overheating-protection was activated
and the cooker has switched off.
Remove cookware from cooker and let unit cool
down before restarting.
E03
Temporary voltage overlad. Cooker
became too hot.
Let cooker cool down before restarting.
Limited 6 Month Warranty
All equipment, which is sold under the AVANTCO trademark and used for commercial purposes, is warranted against
defects in materials and workmanship. The warranty runs for 6 months from the date of purchase and is for the benefit
of the original purchaser only. All other Warranties, Expressed, or Implied, Statutory or Otherwise, including Without
Limitation any implied Warranty of Merchantability or Fitness for Purposes are excluded. The Seller shall in no event be
liable for direct, indirect or consequential damages in connection with AVANTCO commercial products.
This warranty is not effective if damage occurs because of accident, carelessness, improper installation, lack of proper
set – up, supervision when required of if the equipment is installed or operated in any manner contrary to the
installation and operating instructions.
