ON/OFF SWITCH
VOLTAGE
110V /60Hz
with the purpose to keep the equipment best opera ng
condi ons, therefore increasing the equipment life and
safety.
* Cleaning – check item 5. CLEANING
* Wiring - Check all wires regarding deteriorate condi ons
as well as all electric contacts (terminals) regarding
ghtening and corrosion .
*Contacts – ON/OFF switches, emergency bu on, reset
bu on , electronic circuits etc., check the equipment in
order to assure that all components are correctly working
and the equipment opera on is normal .
* Installa on – make sure the installa on followed item 2
instruc ons.
1 - Each month check :
- Check the electrical installa on
- Measure the voltage at the socket
- Measure the working current and match it with the
nominal current
- Check the ghtening of all electric terminals to avoid bad
contacts
- Check electric motor sha clearance
- Check the wiring for overea ng, insula on failures and
mechanical damages .
2 - Each three month checks
- Check electrical components such as ON/OFF switch,
emergency bu on , reset bu on, electronic electric
circuits, overea ng, insula on failings, or mechanical
damages
- Check bearings clearances
- Check retainers, O’rings, V’rings and other sealings.
7. ELECTRIC DIAGRAM
JUICE EXTRACTOR
MODEL
EX SUPER
THE INFORMATIONS CONTAINED IN THE PRESENT INSTRUCTION MANUAL MAY BE MODIFIED WITHOUT PREVIOUS NOTICE.
IN
ST
RU
CT
IO
N
M
AN
U
AL
69962.6 - ENGLISH
Data de Revisão: 01/07/2021
CLARK AND ASSOCIATES, INC.
OLD PHILADELPHIA PIKE
LANCASTER, PA 17602
USA
Phone: 00 1 717 392 7550
info@clarkinc.biz
