background image

 

Using Your Ice Cube Tray 

 

Recommended thermostat setting for ice making is position “MAX”.

 

 

 

Fill the ice cube tray (two thirds of it) with cold water or with any liquid suitable for 
freezing and place the tray on the bottom of the freezer to freeze properly. 

 

Dry the tray, otherwise it may stick to the bottom of the freezer. 

 

The best method to get ice cubes out of the tray is to hold the tray under cold tap 
water for a second. 

 

To eject the ice cubes from the tray, place over the ice bucket and twist slightly 

 
 

 

Freezing Fresh Foods 

 

Proper use of the appliance, adequately packed food, correct temperature and taking into account 
hygienic precautions will substantially influence the quality of freezing the food or storing of the 
frozen foods. 

 

This compartment is designed for the long-term storage of frozen food.   

 

The storage life of frozen foods varies and the recommended storage time should not be exceeded.   

 

Pre-packed commercially frozen food should be stored in accordance with the frozen foods 
manufacturer’s instructions for a three star frozen food storage compartment or home freezer. 

 

Place frozen food into the freezer as quickly as possible after purchase.  If there are instructions on 
the packet, carefully follow these instructions regarding storage times. 

 

Carefully select food you intend to freeze, it should be of adequate quality and suitable for freezing. 

 

Use correct packaging and wrap it tight. 

 

The packaging should be airtight and shouldn’t leak since this could cause substantial vitamin loss 
and dehydration of foods. 

 

Foils and bags should be soft enough to tightly wrap around the foods.  

 

When preparing foods to be frozen, consider sanitary precautions. 

 

Mark packages with following data: kind and amount of foods and the date of loading. 

 

It is extremely important that the food is frozen as quickly as possible. 

 

If the loading amount is too large, the quality of freezing is reduced which affects the quality of 
frozen foods.  

 

 

CARE AND MAINTENANCE 

 

 

Reversing the Door Swing of Your Appliance 

This refrigerator-freezer has the capability of the door opening from either the left or right side. The unit 
is delivered to you with the door opening from the left side. Should you desire to reverse the opening 
direction, please call service for reversal instructions.

 

 

 

Cleaning Your Appliance 

 

Unplug the unit, and remove the food and baskets. 

 

Wash the inside with a warm water and baking soda solution. The solution should be about 2 
tablespoons of baking soda to a quart of water. 

 

Wash the baskets with a mild detergent solution. 

 

The outside of the unit should be cleaned with mild detergent and warm water. 

 

CAUTION 
Failure to unplug the refrigerator-freezer could result in electrical shock or personal injury. 
 
 

 

11 

Summary of Contents for FF990WD






















Reviews: