AV-0009-MU Rv001
User´sManual
aSmart aS.1501
DESCRIPCIÓN
HEATING/COOLING MANAGEMENT
aSmart
allows to manage a heating/cooling system.Two configurations
are possible for this purpose:
·
Configuration BC (Thermostat):
You can set the desired temperature for your home and
aSmart
will be in charge of managing the heating.
·
Configuration BB (on-off):
aSmart
does not manage the house temperature, but
switches the heating/cooling system on and off .
In both configurations you have three operating modes available:
Manual, Automatic and OFF.
·
In Manual mode the system will switch the heating on if the
house temperature is lower than the set-point temperature
(Configuration BC) or it will be always connected
(Configuration BB).
·
In Automatic mode the device works exactly the same way
as on the on the Manual mode, but only during the cycles
set by the user.
·
In OFF mode the heating/cooling system becomes
disconnected.
LIGHTING CONTROL
This function is intended to contribute to home energy consumption
management. At the touch of a button on the screen you can make
sure that you do not leave lights on when you leave home. In
addition, once you come back home,
aSmart
will detect you and
will automatically turn lights on.
PRESENCE SIMULATION
During long term absences from home you can program the lights
to turn on and off simulating the presence in the house. Once you
come back home,
aSmart
will detect you and will automatically turn
lights on.
INTRUSION ALARM
aSmart
can alert you about home intrusions, calling up to five times
to the three phone numbers previously selected, until it receives
an answer. It is possible to hear what is going on in the house or
to talk with someone present in the house to check the alarms. The
sensitivity level of the motion sensor can be adjusted.
FIRE ALARM
aSmart
uses its temperature sensor to determine sudden temperature
increase above 7ºC/minutes, the set value to trigger the fire alarm.
At this moment aSmart will alert you about the incident calling up
to the phone number previously set.
POWER FAILURE ALARM
In the event of power failure system will alert you.
aSmart
will detect
the power outage and after 1 minute it will start the phone alerts.
This function is usefull to avoid any loss or damage to frozen food
during the your absence, for instance stopping frozen food from
thawing.
You will be also informed of the reestablishment of power supply.
ENERGY CONSUMPTION DISPLAY
aSmart
informs you of instantaneous home energy consumption
in kW/h. Furthermore it shows the energy consumption accumulated
for the last 7 days and the last 12 months. In both cases system
can display the energy consumption in kW/h and the number of
hours the heating stays on.
EXCESS OF CONSUMPTION WARNING SYSTEM
You can set up a limit of instantaneous energy consumption,
aSmart
will alert you when the energy usage exceeds this configured
energy threshold. This function can be used to avoid the house
main circuit breaker to go off.
VOICE MAILBOX
aSmart
includes a Voice Mail recorder. It is possible to record up
to a maximum of 9 voice messages, the maximum length of the
recorded messages is 30 seconds/message time, these messages
can be reproduced as many times as necessary. This feature allows
you to record both local messages and those of the answering
machine.
ANSWERING MACHINE
The Voice Mailbox is able to record messages coming from external
telephone calls. This answering machine function is provided with
a factory default pre-recorded voicemail message and you can
also record your own greeting message. The user can select the
outgoing message for incoming calls.
PHONE
aSmart
is a hands-free telephone. You can make outgoing calls
and receive incoming calls before the answering machine picks
up.
PHONE REMOTE CONTROL
aSmart
functions can be remote controlled from any telephone
line. Key-protected access,
aSmart
communicates with the user
through a menu of of pre-recorded voices which will guide him
through the main functions. The user interacts with system using
the telephone keypad, which is able to generate multi-frequency
DTMF tones which enable the engine to fulfill its interlocutor orders.
DESCRIPTION OF THE FUNCTIONS
3
