ASSEMBLY INSTRUCTIONS
10
STEP 8
Insert the
BACK FRAME(7)
into the
SEAT CARRIAGE(6)
and secure with
BUTTON HEAD BOLTS
(M8x1.25x20mm)(49),
and
ARC WASHERS(M8)(58).
STEP 9
NOTE:
The
RIGHT PEDAL(89)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(89)
has
right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(17)
has
L
stamped on
the end of the pedal shaft. The
LEFT PEDAL(17)
has left hand threads and is tightened by turning
counterclockwise.
Thread the
RIGHT PEDAL(89)
into the
RIGHT CRANK(16)
as shown. Tighten the pedal securely. Select
the
RIGHT PEDAL STRAP(90)
which has
R
marked on it. Snap the three hole end to the inside edge of
the
RIGHT PEDAL(89).
Insert the other end of the strap through the slot and snap the strap to the hook
on the outside edge of the
RIGHT PEDAL(89).
Select adjustment holes which allow your foot to be easily
removed from the pedals.
Use the same procedure to attach the
LEFT PEDAL(17)
to the
LEFT CRANK(15)
and snap the
LEFT
PEDAL STRAP(18)
to the
LEFT PEDAL(17).
Meijer.com
Summary of Contents for A150-204
Page 24: ...PRODUCT PARTS DRAWING 24 FRONT BACK Meijer com...
Page 28: ...NOTES 28 Meijer com...
Page 29: ...NOTES 29 Meijer com...
