ASSEMBLY INSTRUCTIONS
11
STEP 13
Insert the
SENSOR WIRE(29)
and
PULSE CONNECTION WIRE(75)
into the bottom end of
METER
POST(31)
and pull them out of the top of the
METER POST(31).
Pull the
HANDLEBAR(25),
twist the
STRAP(21)
and slide the strap thru the gap into the hole in the bottom of the
METER POST(31).
Slide the
METER POST(31)
onto the
MAIN FRAME(1)
and secure with
SCREW(M5x18mm)(84).
STEP 14
Install two
AA
batteries into the
METER(30)
, the batteries are not included. See page 13 for detailed
battery installation instructions. Plug the
SENSOR WIRE(29)
and
PULSE CONNECTION WIRE(75)
into
the
METER(30)
and push the excess wires back into the
METER POST(31).
Place the
METER(30)
on the
plate on the
METER POST(31),
then slide it down to lock in position.
NOTE:
Please be careful not to damage the Sensor Wires when attaching the
METER(30).
Gap
Meijer.com
