Avari Fitness A150-335, Owner'S Manual

B

A

STORAGE

16

a.  Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat.

  NOTE:

  This will prevent the seat from damaging the covers.

b.  Remove the 

PULL PIN(63)

 and swing the 

REAR SUPPORT(62) 

toward the front.

  NOTE:

  This will allow you to pull out the 

RELEASE KNOB(59)

 easily.

c.  Pull out the 

RELEASE KNOB(59)

 and fold up the 

RAIL(52).

 Make sure the 

RAIL(52)

 is locked securely 

in folded position by 

RELEASE KNOB(59).

d.  Lock the 

REAR SUPPORT(62)

 in folded position with the 

PULL PIN(63).

UNFOLD THE AVARI® Conversion II Rower Recumbent Bike

a.  Pull out the 

RELEASE KNOB(59)

 and unfold the 

RAIL(52).

 Make sure the 

RAIL(52)

 is locked securely 

in the unfolded position by 

RELEASE KNOB(59).

b.  Remove the 

PULL PIN(63)

 and swing the 

REAR SUPPORT(62) 

backward, then lock the 

REAR SUPPORT     

(62)

 in position with the 

PULL PIN(63).

B

D

A

C

Grasp Here 

To Move

1.  To store the 

AVARI® Conversion II Rower Recumbent Bike,

 simply keep it in a clean dry place.

2.  To  avoid  damage  to  the  electronics,  remove  the  battery  before  storing  the 

AVARI® Conversion II 

Rower Recumbent Bike

 for one year or more.

3.  Move  the

 AVARI® Conversion II Rower Recumbent Bike

with  the 

MOVING WHEELS(76)

  on 

the 

FRONT STABILIZER(2).

 Grasp the 

RAIL CAP(55)

 to move the 

AVARI® Conversion II Rower 

Recumbent Bike.

 Do not use the Seat to move the 

AVARI® Conversion II Rower Recumbent Bike.

The Seat will move and the Seat Carriage may pinch your hand or fingers.

4.  The  minimum  folded  dimensions  of  the 

AVARI® Conversion II Rower Recumbent Bike

  are 

approximately 33.2 inches long x 23 inches wide x 58.2 inches tall. Please measure your 

AVARI® 

Conversion II Rower Recumbent Bike 

if exact dimensions are needed.

5.  Follow the illustrated process below to fold the 

AVARI® Conversion II Rower Recumbent Bike.

Meijer.com