ASSEMBLY INSTRUCTIONS
9
Release
NOTE:
Be careful not to damage the
PULSE SENSOR WIRE(73)
or
PULSE COIL WIRE(74)
during
assembly steps 8, 9, and 10.
STEP 8
Attach the
HANDRAIL(70)
to the
SEAT CARRIAGE(64)
with
BUTTON HEAD BOLTS(M8x1.25x12mm)
(114).
STEP 9
Attach the
SEAT(68)
to the
SEAT CARRIAGE(64)
with
HEX BOLTS(M6x1x15mm)(95).
Attach the
BACK
CUSHION(69)
onto the
SEAT CARRIAGE(64)
with
HEX BOLTS(M6x1x30mm)(96).
STEP 10
Turn the knob of the
SPRING PIN(67)
counterclockwise and lock the knob in the release position, refer to
the inset drawing.
Slide the
SEAT CARRIAGE ASSEMBLY(64)
into the
RAIL(52).
Press the
RAIL CAP(55)
into the back end of the
RAIL(52).
Insert the
STOPPER BOLT(54)
through the
RAIL(52)
and
RAIL CAP(55)
to bolt them together with the
STOPPER(53).
Please verify that the other
STOPPER BOLT(54)
at the front end of
RAIL(52)
was assembled at the factory.
Meijer.com
