ASSEMBLY INSTRUCTIONS
8
STEP 2
Refer to illustration A. Attach the
RIGHT UPRIGHT(4)
to the
MAIN FRAME(1)
with
BUTTON HEAD
BOLT(M10x1.5x65mm)(43),
and
PLASTIC WASHER(ø10.2xø25x4mm)(25).
Repeat on other side.
STEP 3
Refer to illustration B. Rotate the
LEFT
and
RIGHT UPRIGHTS(3, 4)
to the upright position. Attach the
LEFT
and
RIGHT UPRIGHTS(3, 4)
to the
BASE FRAME(2)
with
CARRIAGE BOLTS(M8x1.25x45)(42),
WASHERS(M8)(61),
and
NYLOCK NUTS(M8x1.25)(19).
STEP 4
Refer to the detail view. Lock the
MAIN FRAME(1)
in the unfolded position by inserting the
LOCKING
KNOB(44)
through the hole in the
LEFT UPRIGHT(3)
and screwing it into the
MAIN
FRAME(1).
STEP 5
Install the
TENSION KNOB(45)
into the opening in the
RIGHT UPRIGHT(4)
and secure with
ROUND
HEAD SCREW(M5x0.8x15mm)(46)
and
WASHER(M5)(47).
A.
B.
Support Tube protuding
out at this side.
Summary of Contents for A450-261
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 22: ...NOTES 22 ...
