background image

6

Part No. and Description   

 

 

 Qty

62 

Bolt, Button Head (M6 x 1 x 40mm) 

 

    4

63 

Bolt, Button Head (M8 x 1.25 x 45mm) 

 

    4

33 

Nylock Nut (M6 x 1)   

 

 

 

    4

47 

Nylock Nut (M10 x 1.5) 

 

 

 

    4

72 

Thin Nylock Nut (M8 x 1.25 x 6mm thick)   

    4

37 

Arc Washer (M8) 

 

 

 

                6

46 

Washer (ø10 x ø19 x 2mm thick)   

 

    2

60 

Washer (M10 x ø21 x 1.5mm thick)  

 

    2

68 

Washer (M8)   

 

 

 

 

    7

19 

Carriage Bolt (M8 x 1.25 x 60mm)   

 

    4

55 

Bolt, Button Head (M8 x 1.25 x 25mm) 

 

    6

67 

Bolt, Button Head (M8 x 1.25 x 15mm) 

 

    3

length

length

mm.

in.

INCHES

This chart is provided to help identify the hardware used in the assembly process. Place the washers or 

the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to 

check the length of the bolts and screws.

NOTICE: 

The  length  of  all  bolts  and  screws,  except  those  with  flat 

heads, is measured from below the head to the end of the bolt 

or screw. Flat head bolts and screws are measured from the 

top of the head to the end of the bolt or screw.

After unpacking the unit, open the hardware bag and make sure that you have all the following items. 

Some hardware may be already attached to the part.

MILLIMETERS

0      10     20     30     40     50     60     70     80     90    

 

100    

 

110    

 

120    

 

130    140    

 

150

0         1/2         

 

1         1/2         

 

2         1/2         

 

3         1/2         

 

4         1/2         

 

5         1/2         

 

6

  8 

     

 

10 

         

 

12

3/16" 

 

1/4"     

 

5/16"        3/8"             1/2"

HARDWARE IDENTIFICATION CHART

57 

Acorn Nut (M8 x 1.25) 

 

 

 

    4

13 

Shoulder Bolt (ø15.9x77mm, M10x1.5 threaded)      2

Summary of Contents for A550-090
























Reviews: