ASSEMBLY INSTRUCTIONS
10
B.
STEP 7
There is a
“R”
decal on the
RIGHT HANDLEBAR(9),
and a
“L”
decal on the
LEFT HANDLEBAR(10).
Refer to detail view
B.
Feed the plug end of the
PULSE SENSOR WIRE(30)
through the tube on the top
of the
PIVOTING ARM(6).
Insert the
LEFT HANDLEBAR(10)
into the
PIVOTING ARM(6)
and secure with
BUTTON HEAD BOLTS(M8x1.25x36mm)(50)
and
THIN NYLOCK NUTS(M8x1.25)(71).
Connect the
PULSE SENSOR WIRE(30)
to the
PULSE CONNECTION WIRE(29)
and push the plugs into the
PIVOTING
ARM(6).
Clip a
GROMMET PLUG(32)
onto the
PULSE CONNECTION WIRE(29)
and press the
GROMMET
PLUG(32)
into the hole in the
PIVOTING ARM(6).
Repeat on the right side.
STEP 8
Attach the
STATIONARY HANDLEBAR(11)
to the
UPRIGHT(4)
with
BUTTON HEAD BOLTS(M8x1.25x25mm)
(53), LOCK WASHERS(M8)(68),
and
WASHERS(M8)(65).
L
R
