FUNCTION INSPECTION:
Visually inspect the
AVARI® Programmable Magnetic Elliptical
to verify that assembly is as shown in
the above illustration. Check the function of the
AVARI® Programmable Magnetic Elliptical,
stand on the
PEDAL CAPS(78, 79)
and place your hands at a comfortable position on the
HANDLEBARS(9, 10).
Slowly
move the crank through one complete revolution to verify that the drive train functions properly.
Use the
UP/
DOWN
dial and
ENTER
button on the
COMPUTER(25)
to select a program and verify that the Magnetic
System provides different tensions. Refer to the COMPUTER INSTRUCTIONS on pages 16 to 24.
CAUTION:
Locate and read the
WARNING LABEL(95)
on the
AVARI® Programmable Magnetic
Elliptical.
Make sure that all users read the
WARNING LABEL(95)
before using the product.
SET UP INSTRUCTIONS
13
Equipment Mat
Place the
AVARI® Programmable Magnetic Elliptical
in the area where it will be used. It is recommended
that the
AVARI® Programmable Magnetic Elliptical
be placed on an equipment mat. The maximum
operation dimensions of the
AVARI® Programmable Magnetic Elliptical
are approximately 52.6 inches
long x 25.4 inches wide x 57 inches tall. (These dimensions may vary up to one inch.) Make sure that
adequate space is available for access to passage around and emergency dismount from the
AVARI®
Programmable Magnetic Elliptical.
A minimum of 20 inches on at least one side and 20 inches either
behind or in front of the
AVARI® Programmable Magnetic Elliptical
is required for safe operation.
LEVELING:
Turn the dials in the
ADJUSTABLE ENDCAPS(81)
which are attached to the
REAR
STABILIZER(2)
so that the
AVARI® Programmable Magnetic Elliptical
sits on the floor
without rocking.
MOVING:
The
AVARI® Programmable Magnetic Elliptical
has a pair of wheels built into the
LEFT
and
RIGHT ENDCAPS(103, 104)
at the front. Grasp the
STATIONARY HANDLEBAR(11)
and tip the
AVARI® Programmable Magnetic Elliptical
forward to move.
Dial
Dial
