Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0 °C~40 °C/ 32 °F~104 °F
Storage Temperature
−20 °C ~ 60 °C/−4 °F ~140 °F
Relative Humidity
20~90 % RH (non-condensing)
Power Consumption
10 W
5. Operation and Fuctions
5.1 Front panel
1. ON/OFF:
Power on/off switch.
2. SERVICE:
For factory use only.
3. IR :
Remote control receiver window.
4. POWER LED:
This red LED illuminates when the device is connected with
power supply.
5. IN1,2,3,4 LED:
These red LED illuminates when the output select to the
corresponding input.
6. INPUT BUTTON:
Press this button to select the input source.
7. MODE BUTTON:
Press this button to select the multi-view display mode.
※
see the detail description below(chapter 5.7).
8. RESO BUTTON:
Press this button to select the HDMI output resolution.
5.2 Rear panel (Basic Version)
1. Input:
These slot is where you connect the HDMI source output from DVD,
PS3,Set-top Box and Note Book.
2. OUTPUT:
The HDMI is where you connect the HDTV or monitor with HDMI
cable for input source display.The Coax is where you connect to the amplifier with
coaxial cable.
3. IR RX:
Connect to the IR Receiver for IR signal reception. Ensure that remote
being used is within the direct line-of-sight of the IR receiver.
4. IR TX:
Connect the IR Blaster cable included in the package for IR signal
transmission. Pace the IR blaster in direct line-of-sight of the equipment to be
controlled.
