smaller picture display on one screen.And now switch the input button on front panel
or IR remote ,the bigger picture will Corresponding to the selected input source. The
HDMI output audio follow the bigger picture source.
MODE3:
The quad multi-viewer will separate display the four HD input,and now it is
a seamless swithcer.
6.Remote Control
1.
Input select button
:press these buttons,the quad
multi-viewer will select the corresponding input
source,the front panel LED will indicate the
selected input source status .
2.
Mode select button
:press these buttons,the quad
multi-viewer will select the Corresponding mode,
see the detail description(chapter 5.7).
3.
Resolution button
:press these buttons ,the
HDMI will output different resolution,
1080p,1080i,720p,1024x768,1360x768.
The F1,F2 button expand for user defined fuction.
Press the Reset button,the quad multi-viewer will
reset to factory state.
4.
Picture button:
press these buttons can adjust the
display picture contrast,brightness,color and
sharpness.
7. PC controller user guide
Installation
The PC controller is green software. Just use a cable to connect the PC via RS232
port and copy “Quad multi-viewer.exe” to PC to complete installation.
Preparation
1. Connect PC and multi-viewer by RS232 cable (headers of both sides of cable
should be FEMALE)
2. Power-up multi-viewer
3. Double click Quad multi-viewer.exe icon to run it
