Avaya 3050-VM User Manual Download

Page: 2 / 274

2013 Avaya Inc.

Notice

While reasonable efforts have been made to ensure that the

information in this document is complete and accurate at the time of

printing, Avaya assumes no liability for any errors. Avaya reserves the

right to make changes and corrections to the information in this

document without the obligation to notify any person or organization of

such changes.

Documentation disclaimer

“Documentation” means information published by Avaya in varying

mediums which may include product information, operating instructions

and performance specifications that Avaya generally makes available

to users of its products. Documentation does not include marketing

materials. Avaya shall not be responsible for any modifications,

additions, or deletions to the original published version of

documentation unless such modifications, additions, or deletions were

performed by Avaya. End User agrees to indemnify and hold harmless

Avaya, Avaya's agents, servants and employees against all claims,

lawsuits, demands and judgments arising out of, or in connection with,

subsequent modifications, additions or deletions to this documentation,

to the extent made by End User.

Link disclaimer

Avaya is not responsible for the contents or reliability of any linked

websites referenced within this site or documentation provided by

Avaya. Avaya is not responsible for the accuracy of any information,

statement or content provided on these sites and does not necessarily

endorse the products, services, or information described or offered

within them. Avaya does not guarantee that these links will work all the

time and has no control over the availability of the linked pages.

Warranty

Avaya provides a limited warranty on its hardware and Software

(“Product(s)”). Refer to your sales agreement to establish the terms of

the limited warranty. In addition, Avaya’s standard warranty language,

as well as information regarding support for this Product while under

warranty is available to Avaya customers and other parties through the

Avaya Support website:

http://support.avaya.com

. Please note that if

you acquired the Product(s) from an authorized Avaya reseller outside

of the United States and Canada, the warranty is provided to you by

said Avaya reseller and not by Avaya. “Software” means computer

programs in object code, provided by Avaya or an Avaya Channel

Partner, whether as stand-alone products or pre-installed on hardware

products, and any upgrades, updates, bug fixes, or modified versions.

Licenses

THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA

WEBSITE,

HTTP://SUPPORT.AVAYA.COM/LICENSEINFO

ARE

APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR

INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC.,

ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA RESELLER

(AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH

AVAYA OR AN AUTHORIZED AVAYA RESELLER. UNLESS

OTHERWISE AGREED TO BY AVAYA IN WRITING, AVAYA DOES

NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED

FROM ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR

AN AVAYA AUTHORIZED RESELLER; AVAYA RESERVES THE

RIGHT TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE

ELSE USING OR SELLING THE SOFTWARE WITHOUT A LICENSE.

BY INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR

AUTHORIZING OTHERS TO DO SO, YOU, ON BEHALF OF

YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING,

DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER

REFERRED TO INTERCHANGEABLY AS “YOU” AND “END USER”),

AGREE TO THESE TERMS AND CONDITIONS AND CREATE A

BINDING CONTRACT BETWEEN YOU AND AVAYA INC. OR THE

APPLICABLE AVAYA AFFILIATE (“AVAYA”).

Avaya grants you a license within the scope of the license types

described below, with the exception of Heritage Nortel Software, for

which the scope of the license is detailed below. Where the order

documentation does not expressly identify a license type, the

applicable license will be a Designated System License. The applicable

number of licenses and units of capacity for which the license is granted

will be one (1), unless a different number of licenses or units of capacity

is specified in the documentation or other materials available to you.

“Designated Processor” means a single stand-alone computing device.

“Server” means a Designated Processor that hosts a software

application to be accessed by multiple users.

Licence types

Designated System(s) License (DS). End User may install and use

each copy of the Software only on a number of Designated Processors

up to the number indicated in the order. Avaya may require the

Designated Processor(s) to be identified in the order by type, serial

number, feature key, location or other specific designation, or to be

provided by End User to Avaya through electronic means established

by Avaya specifically for this purpose.

Concurrent User License (CU). End User may install and use the

Software on multiple Designated Processors or one or more Servers,

so long as only the licensed number of Units are accessing and using

the Software at any given time. A “Unit” means the unit on which Avaya,

at its sole discretion, bases the pricing of its licenses and can be,

without limitation, an agent, port or user, an e-mail or voice mail account

in the name of a person or corporate function (e.g., webmaster or

helpdesk), or a directory entry in the administrative database utilized

by the Software that permits one user to interface with the Software.

Units may be linked to a specific, identified Server.

CPU License (CP). End User may install and use each copy of the

Software on a number of Servers up to the number indicated in the

order provided that the performance capacity of the Server(s) does not

exceed the performance capacity specified for the Software. End User

may not re-install or operate the Software on Server(s) with a larger

performance capacity without Avaya’s prior consent and payment of an

upgrade fee.

Named User License (NU). You may: (i) install and use the Software

on a single Designated Processor or Server per authorized Named

User (defined below); or (ii) install and use the Software on a Server so

long as only authorized Named Users access and use the Software.

“Named User”, means a user or device that has been expressly

authorized by Avaya to access and use the Software. At Avaya’s sole

discretion, a “Named User” may be, without limitation, designated by

name, corporate function (e.g., webmaster or helpdesk), an e-mail or

voice mail account in the name of a person or corporate function, or a

directory entry in the administrative database utilized by the Software

that permits one user to interface with the Software.

Heritage Nortel Software

“Heritage Nortel Software” means the software that was acquired by

Avaya as part of its purchase of the Nortel Enterprise Solutions

Business in December 2009. The Heritage Nortel Software currently

available for license from Avaya is the software contained within the list

of Heritage Nortel Products located at

http://support.avaya.com/

LicenseInfo

under the link “Heritage Nortel Products”. For Heritage

Nortel Software, Avaya grants Customer a license to use Heritage

Nortel Software provided hereunder solely to the extent of the

authorized activation or authorized usage level, solely for the purpose

specified in the Documentation, and solely as embedded in, for

execution on, or (in the event the applicable Documentation permits

installation on non-Avaya equipment) for communication with Avaya

equipment. Charges for Heritage Nortel Software may be based on

extent of activation or use authorized as specified in an order or invoice.

Copyright

Except where expressly stated otherwise, no use should be made of

materials on this site, the Documentation, Software, or hardware

provided by Avaya. All content on this site, the documentation and the

Product provided by Avaya including the selection, arrangement and

2 User Guide

April 2013

Comments? infodev@avaya.com

Summary of Contents for 3050-VM



















































































































































































































































































Search results

Summary of Contents for 3050-VM

Reviews:

Related manuals for 3050-VM

Brands by name

Popular brands

Avaya 3050-VM, User Manual

Search results

Summary of Contents for 3050-VM

Reviews:

Related manuals for 3050-VM

Brands by name

Popular brands