background image

Avaya 

3400 Series Wireless Telephone User Guide 

Operation 

The user must end any call in progress by pressing the 

END

 key on 

the handset before placing the handset into the charger. The call 
will not automatically terminate when the handset is placed in the 
charger. The Battery Pack and handset will only fit into the charger 
compartments one way. The handset should be inserted into the 
front slot, facing forward. The Battery Pack alone should be 
inserted into the rear slot with the side that attaches to the handset 
facing to the rear. See the cover photo for the correct orientation. 
Correct placement has been achieved when the charging light is 
activated. Incorrect placement will not activate the charging light. 

Indicator lights 

 

The Dual Charger is designed to charge one Battery Pack at a time. 
Each charging slot has a red light that indicates its current mode. 
The charging lights have the following characteristics: When both a 
Battery Pack and a handset are present at the same time, the first 
one placed into the charger will begin charging. When it is fully 
charged, the second Battery Pack will charge. When the LED 
indicator light turns off, the charger is finished charging the Battery 
Pack in its slot, indicating that the Battery Pack is ready for use. The 
Dual Charger will recharge a single NiMH Battery Pack or a single 
handset in two hours.  

 

Indication Light

 

Charging Characteristic

 

Solid On 

Charging. 

Solid Dim 

Waiting to charge. Battery Pack in other 
slot is charging. 

Off 

Done charging, empty slot or unit is not 
powered. 

Flash 

Error. Battery Pack not charging. Try 
again or replace Battery Pack. 

 

555-301-701, Issue 2, July 2005 

Page 12 

Summary of Contents for 3400 Series























Reviews: