Avaya 3641 Installation, Configuration And Administration Download

Page: 24 / 150

Part A: Avaya Voice Priority Processor

Avaya Voice Priority Processor, Avaya 3641/3645 Wireless IP Telephone, Handset Administration Tool

Phones per Access Point

– Access point specifications are detailed in the

Configuration Notes

for each brand and type. Refer to these notes when entering the

number of simultaneous calls supported for your type.

802.11 Rate

– Select

1MB/2MB

to limit the transmission rate between the Wireless IP

Telephones and access points. Select

Automatic

to allow the Wireless IP Telephone to

determine its rate.

First Alias IP Address/Last Alias IP Address

– Alias IP Addresses are not necessary in

Avaya systems.

Enable H.323 Gatekeeper

– In certain H.323 protocol systems, the AVPP may function

as a gatekeeper. Enter Y to have the AVPP function as the gatekeeper in the H.323
protocol environment.

Ethernet link –

The AVPP will auto-negotiate unless there is a need to specify a link

speed.

Check-in throttling

–

The check-in throttling option regulates the number of handsets

that can check-in simultaneously. The error Maximum payloads reached is caused by
a massive check-in that has overwhelmed the server. If persisting, throttling may be

raised. However, a setting that is too high may slow check-in performance. The option
allows for a setting from 0 to 4, with 0 being the least amount of throttling and 4
being the most. Consult with Customer Support for help in determining if throttling is

advised for your system.

Missed ding limit–

The Missed ding limit defaults to 3 and should be left at this setting

unless advised by Customer Service to raise or lower it. The DING message is a

proprietary method of communication between system elements. This setting is
designed to assist service engineers in fine-tuning system performance and should
not be changed without their consultation.



Load balancing enables a locked SVP Server to distribute idle handsets to other
SVP Servers in the cluster. Existing calls will not be interrupted and the SVP

Server will become idle once all calls are ended and idle phones are transferred
to another SVP Server.

System Locked – T

his option is used to take the system down for maintenance. The

default entry is

(No). Set it at

(Yes) to prevent any new calls from starting. Return

to restore normal operation.

Maintenance Lock –

The system automatically sets this option to

(Yes) after certain

maintenance activities that require reset, such as changing the IP address.
Maintenance Lock prevents any new calls from starting. Note that the administrator

cannot change this option. It is automatically set by the system. Reset the system at
exit to clear Maintenance Lock.

Inactivity Timeout (min) –

Set the number of minutes the administrative module can be

left unattended before the system closes it. This number can be from 1 to 100. If it is

set to zero (0), the administrative module will not close due to inactivity.

QoS Configuration –

Select this option to set the DSCP tags. See

QoS Configuration

section below.

Reset System

– If this option is selected, you will be prompted to reset the Avaya Voice

Priority Processor upon exiting this screen.