Procedure
Do any of the following:
• Press a
Multifunction
button,
Soft
key,
Hot
key, or a
Navigation
key and define it as a
shortcut to a
Phone call
(
) function. When you press a key or a button, a predefined number
is called.
The support for a
Multifunction
button, depends on the model of handset used.
•
When receiving a call, press the soft key
. The
Soft
key might have another or no function
depending on its configuration of the
In call
function in WinPDM or Device Manager.
•
During a call, press the soft key
. The
Soft
key might have another or no function depending
on its configuration of the
In call
function in WinPDM or Device Manager.
• During a call, put the handset in a charger. Requires that the
Loudspeaking
function is chosen
in the
In Charger
menu.
• This function can also be activated by selecting another answering method, that is,
Automatically
and or
Loudspeaking
.
Sending data
About this task
Sent data can be used to initiate actions such as:
• Opening a door.
• Starting and stopping a machine.
Procedure
To send user entered data from the handset, do any of the following:
• Press pre-programmed hot key.
• Press pre-programmed soft key.
• Select a service.
The data can either be predefined, entered after the hot key or soft key is pressed, or send
when the relevant service is selected.
Menu operation
August 2019
Using 3735 DECT handsets with Communication Manager and IP Office
74