Procedure
1. Press
More
.
2. Select
End Call
.
The
End Call
option is visible only when it is configured in the handset.
3. Press
Select
.
The handset ends the current call and resumes the previous call.
Sending call waiting
About this task
Use this procedure to notify the engaged party that another call is trying to reach them.
Procedure
1. Press
More
.
2. Select
Call waiting
. The
Call waiting
function is visible, only if the administrator has
activated in the handset.
3. Press
Select
.
The engaged party receives a
Call waiting
signal.
When the line is free it automatically calls the number again. This is system dependent
function.
Answering call waiting
About this task
Use this procedure to answer call waiting when you:
• Receive a short tone for another incoming call during an ongoing conversation.
• Receive a beep from the handset and a text display:
Internal call
for internal callers and
External call
for external callers. The handset also displays the name or the phone number
of the second caller.
Note:
You can use
Answer call waiting
function in two different ways depending on the system
setup and configuration.
Procedure
During a call, you receive a short tone. To answer the second call, do the following:
1. Press
More
.
2. Select
Answer call waiting
.
3. Press
Select
.
You connect to the new call and the first call is put on hold. When the line is free, the call
on hold is automatically dialled again. This is a system dependent feature.
Menu operation
August 2019
Using 3735 DECT handsets with Communication Manager and IP Office
72
