Note:
An IM is indicated and viewed the same way as an ordinary message. It is saved along with
other messages in the message list.
When an IM has been read, the IM may display several options. Mark the one required and press
Select
. If the selected option requests input, enter the information needed and press
OK
. A press
on the
*
-key changes to digit or text input mode depending on whether it is digit or text format in
the message. A read message is indicated the same way as an ordinary message.
Note:
If a handset receives an IM update when the original message already has been deleted, the
handset automatically sends a negative acknowledge (NAK) to the system, if requested.
The options for an IM depends on the configuration in the client application.
Figure 4: Example of an interactive message
Mobile data from the handset can initiate the application to send the interactive message.
Message indication repetition
The handset can be configured to repeat the audio and visual message received alert. The alert
repeats every seven seconds until the user reads the message or turns the alert off. Certain
system-defined properties can be assigned to a message to give it a high priority, for example, an
alarm priority message.
Alert repeats start automatically when a high priority message is received. Such messages do not
need to be explicitly configured to trigger alert repeats. A high priority alert is repeated every 10
Managing messages
August 2019
Using 3735 DECT handsets with Communication Manager and IP Office
93
