Phone lock settings
The handset can be protected for unauthorized use by activating the automatic phone lock. You can
configure one of the following options for automatic phone lock:
•
On
: The handset is automatically locked if it is not used before the specified auto-lock time
expires, or when it is first turned on. The auto-lock time is specified in the
Auto lock time
parameter.
•
On in charger
: The handset is locked immediately when placed in the charger.
•
Off
: The handset is never locked.
You can change the default phone lock PIN code (“0000”) to a code of your choice. The code should
be of minimum four digits and maximum eight digits.
The
Auto lock time
parameter specifies the time after which the handset is automatically locked.
The shortest value is five seconds and the longest is three minutes.
Note:
If this feature is configured in the
WinPDM
or
Device Manager
, you can call any one of the five
predefined emergency numbers while the handset is locked.
Tip:
If the multifunction button (for 3740 only) is configured as a shortcut to a predefined number,
you can use it even when the handset is locked. Similarly, you can use the alarm button (for
3745 and 3749) as well.
Activating automatic phone lock
Procedure
1. Press
Menu
.
2. Select
Settings
.
3. Select
Locks
>
Phone lock
>
Auto phone lock
.
4. Select one of the following:
•
On
•
On in charger
5. Enter a PIN code of your choice, and then press
OK
.
The code should be of minimum four digits and maximum eight digits.
Note:
If you forget the PIN code, it can be reset by your distributor.
6. Press
Back
.
7. Select
Auto lock time
, and then select the required lock time.
Settings
July 2017
Using Avaya 374x DECT handsets connected to Avaya Aura
™
Communication
Manager and IP Office
89
