background image

Release 7.2

NN47212-302

Issue 02.01

June 2016

Installation Job Aid for Avaya Ethernet Routing Switch 4900
Series (NN47212-302, ver 02.01)

How to get help

To access the complete range of services and support that Avaya provides, go to 

www.avaya.com

.

You can also go to 

www.avaya.com/support

 to access the following pages:

• technical documentation

• product training

• technical support

If you purchased a service contract for your Avaya product from a distributor or authorized reseller
and you need assistance, contact the technical support staff for that distributor or reseller.

Notices

Notice paragraphs alert you about issues that require your attention. The following paragraphs
describe the types of notices used in this guide.

Note:

Notes provide tips and useful information regarding the installation and operation of Avaya
products.

Electrostatic alert:

ESD

ESD notices provide information about how to avoid discharge of static electricity and
subsequent damage to Avaya products.

Caution:

Caution notices provide information about how to avoid possible service disruption or damage to
Avaya products.

©

 2015-2016, Avaya, Inc.

All Rights Reserved.

1

Summary of Contents for 4900 Series














Reviews: