Job Aid: Installing the upgrade memory kit in the G450 / G430 Media Gateway
12 Job Aid: Installing the upgrade memory kit in the G450 / G430 Media Gateway
●
Replacing a compact flash memory card while retaining the current announcements
. You
may wish to do this because the current compact flash memory card failed, or you want to
have two copies of the announcement files, or you want to use a faster compact flash card.
●
Downgrading from a compact flash to internal flash memory
Replacing a compact flash memory card with a different compact flash
memory card
1. At the SAT interface of the CM, enter
disable announcement-board
.
!
Important:
Important:
If you do not enter the SAT command
disable announcement-board
, then,
when you insert the new compact flash, its contents will be overwritten by the
contents of the old compact flash.
2. Make sure the yellow CARD IN USE LED associated with the compact flash is not flashing.
!
WARNING:
WARNING:
If a compact flash is removed while it is in use, the announcement files on the
compact flash may become corrupted and the gateway may reset, causing all
announcement files in RAM to be lost.
3. Remove the compact flash memory card.
4. Insert the new compact flash memory card into the compact flash slot.
5. At the SAT interface of the CM, enter
enable announcement-board
.
Replacing a compact flash memory card while retaining the current
announcements
1. Make sure the yellow CARD IN USE LED associated with the compact flash is not flashing.
!
WARNING:
WARNING:
If a compact flash is removed while it is in use, the announcement files on the
compact flash may become corrupted and the gateway may reset, causing all
announcement files in RAM to be lost.
2. Remove the compact flash memory card.
3. Insert the new compact flash memory card into the compact flash slot.
The announcement files of the old compact flash are written to the new compact flash.
