Inserting or removing a compact flash memory card
03-603203 Issue 1 May 2009
13
Downgrading from a compact flash to internal flash memory
You can downgrade from using up to 1024 announcements on a compact flash to using up to
256 announcements on the internal flash.
!
WARNING:
WARNING:
The internal flash can only store up to 256 announcement files, totaling no more
than 45 minutes.
1. Backup the announcements from the compact flash to a USB device by entering the
gateway CLI command
backup config usb
usb-device
backup-name
announcements-compact-flash
.
Note:
Note:
If you have only a few announcement files, you can use the gateway CLI
command
copy announcement-file usb
to copy them one by one.
2. At the SAT interface of the CM, enter
disable announcement-board
, and then set
enable CF
to
n
in the
change media-gateway
screen.
3. Remove the compact flash memory card.
4. Optionally remove the second RAM card.
5. At the SAT interface of the CM, enter
enable announcement-board
.
6. Make sure there are no more than 256 announcement files in the backup. If the number of
announcement files exceeds 256, manually delete as many as necessary in the backup
directory.
7. Restore the announcements from the USB device to internal flash by entering the gateway
CLI command
restore usb
usb-device
backup-name
announcements-internal-flash
.
Note:
Note:
If you copied the announcement files one by one, you can restore them one by
one using the gateway CLI command
copy ftp announcement-file
.
8. Screw on the blank plate to cover the compact flash slot.
