INSTALLATION
Avaya 9135 6000 VA UPS Site Preparation, Installation and Operator’s Manual
S
164201769 Rev 1
23
UPS Setup
The Avaya 9135 UPS is designed for flexible configurations and can be
installed in a rack or as a standalone cabinet.
If you are installing the UPS in a rack, continue to the following section,
“Rackmount Setup;” otherwise, continue to “Tower Setup” on page 30.
Rackmount Setup
The rail kit can be mounted in 19-inch panel (48 cm) racks from 24 to
30 inches (61 to 76 cm) deep and includes:
S
Left and right sliding rail assemblies
S
(20) M4
×
6 mm Phillips
®
flat-head screws
S
(4) M4
×
10 mm Phillips round-head screws
S
(4) M6
×
12 mm Phillips round-head screws
S
(8) M6
×
12 mm Phillips flat-head screws
S
(2) mounting brackets
S
(2) rear hold-down brackets